Back to overview
StoTherm Mineral
External wall insulation system with optimised fire protection and a large selection of materials
Products and systems vary from location to location due to local building regulations and standards. We strongly advise you to make contact, your local expert will be happy to consult you on standards and approval.
- non-combustible
- large seamless facade surfaces possible
- huge variety of creative possibilities using colour shades, textures, and materials
- entirely mineral coating build-up possible
- high resistance to micoorganisms (algae and fungi), especially with an additional paint build-up
- water vapour permeable
- complete range of system components for efficient supply and delivery
Properties
- approved insulation board made of mineral wool
- for natural stone and ceramic cladding up to 200 mm
Reaction to fire
- non-combustible, class A2-s1, d0 in accordance with EN 13501-1
Impact resistance
- resistant to mechanical stress
- hail impact resistance class 3 in the appropriate system build-up
- can be used with increased wind loads provided there is additional suitable fixing
- optional Lotus-Effect® Technology
- anti-electro-smog optional
Use
Area of application
- new and existing buildings
- especially suitable for high rise buildings and buildings with increased requirements on fire protection
- to be used in accordance with the local building rules and regulations
- suitable for buildings in accordance with the lowest energy standard
- suitable for all climate zones
- masonry, e.g. brick, calcium silicate masonry units, cellular concrete, fair-faced masonry and masonry veneer
- concrete, concrete slab construction
- timber construction (solid, frame and panel construction)
- steel construction (column and framing)
- lightweight construction
- existing external wall insulation systems (doubling-up of insulation)
Fixing
- bonding
- bonding and fixing with anchors
- purely mechanical fixing
- suitable for application by machine
- no additional paint coat necessary if using cement-free finishing render
- special protection against algae and fungi with a double coat of paint
Creative possibilities
Design options
- Acrylic renders, silicone resin renders, and renders with Lotus-Effect® Technology in stippled render texture, rilled render texture, or in free-style textured render
- three-dimensional facade elements made of Verolith granulate
- Natural stone tiles, brick slips, and ceramic tiles
Colour spectrum
- great choice of colour shades in accordance with the StoColor System
- light reflectance value ≥ 20 %
Certification
The relevant European and/or national approvals apply.
