Back to overview
StoVentec S
Ventilated rainscreen cladding facade with a natural stone tile surface Seamless, rainscreen cladding facade with a natural stone tiles
Products and systems vary from location to location due to local building regulations and standards. We strongly advise you to make contact, your local expert will be happy to consult you on standards and approval.
System advantages
- for the design of individual, high-quality natural stone surfaces
- benefits in terms of building physics thanks to rear ventilation of the facade (humidity, sound and thermal protection)
- unevenness can be levelled by means of an adjustable sub-construction
- lowest thermal bridging coefficient due to bespoke sub-construction made from a combination of stainless steel and aluminium
- passivhaus-certified sub-construction possible that is free from thermal bridges
- highly weather-resistant
- very high crack resistance
Properties
Thermal protection
- mineral wool faced with nonwoven
- thick insulant layer possible
- system implementation also possible without insulation
Reaction to fire
- in a defined system build-up, class A2-s1, d0 in accordance with EN 13501-1 when using the StoVentec Carrier Board A or in accordance with national standards when using the StoVentec Carrier Board
- in a defined system build-up, class A2-s1, d0 in accordance with EN 13501-1 when using the StoVentec Carrier Board S, or in accordance with national standards when using the StoVentec Carrier Board
- fire barriers may be required in accordance with national specifications
Impact resistance
- highly resistant to mechanical stress
Sound insulation
- improvement of up to 14 dB (A) in the sound reduction index
Use
Area of application
- new and existing buildings, installation limits in accordance with national building regulations
- suitable for passivhaus standard with a certified sub-construction
- thick system build-ups (e.g. > 60 cm) possible
Substrate
- masonry, e.g. brick, calcium silicate masonry units, cellular concrete, fair-faced masonry and masonry veneer
- concrete and concrete slab construction (three-layer concrete slabs)
- timber frame construction
Fixing
- easily adjustable sub-construction made of a stainless steel/aluminium combination
- in timber frame construction with timber supporting battens
Application
- complete selection of detail solutions
- fast installation
Creative possibilities
Design options
- natural stone tiles
- surface polished, honed, sand-blasted, brushed, edges bevelled as standard (also without bevel on request)
- can be combined with three-dimensional facade elements made of Verolith granulate
Colour spectrum
- extensive selection of colours due to various natural stones
Certification
Approvals
The relevant European and/or national approvals apply.